System Log Tab; Focus Refresh; Access Log Tab; Delete Voice Alert File - Sony Ipela SNC-VB635 User Manual

Focus refresh

Supported models: SNC-VB632D/VM630/VM600/
VM600B/VM631/VM601/VM601B/VM632R/
VM602R/EM603/EM600/EM631/EM601/EM632R/
EM602R/EB632R/EB602R
Focus may move slightly due to large impacts to the
camera.
Reset the focus position to the setting position by
performing the refresh operation.
Manual
Click Execute to perform the refresh operation.
Schedule
Set time and date to perform the refresh operation
periodically.

Delete voice alert file

Click Delete to delete all the audio files stored in the
camera using the SNC audio upload tool.
This function is not available for SNC-XM637/XM636/
XM632/XM631.
Notes
• Clicking Delete deletes all the stored audio files
simultaneously. To delete a specified audio file only,
perform deletion of the audio file in the corresponding
Execution Condition tab of the Action output menu
(page 61).
• Before deleting the audio file, set Voice alert to Off in
the Execution Condition tab of the Action output
menu (page 61).

Delete superimpose logo

Click Delete to delete the superimposed logo, specified
by Position in the Superimpose tab of the Video / Audio
menu, from the camera.
To set whether to show or hide the superimpose logo,
you need to configure the setting under the Superimpose
tab.

System log Tab

The data of the software activity of the camera is
recorded in this log. It includes data that is useful if a
problem occurs.
Click Reload to reload the latest data.
Click Log level in the list box to adjust the importance
of information to be recorded in the camera as a system
log.
Set the maximum record number to be recorded in the
camera in Log size.
Log information can be saved as a file by clicking
Download of Download as file.
26
Configuring the System — System Menu

Access log Tab

The access record of the camera is displayed.
Click Reload to reload the latest data.
Click Log level in the list box to adjust the importance
of information to be recorded in the camera as a system
log.
Set the maximum record number to be recorded in the
camera in Log size.
Log information can be saved as a file by clicking
Download of Download as file.