System Log Tab - Sony SNC-EP520 User Manual

Available period of time
Set the time period within which video & PT drive
refresh can be performed.
Always: Video & PT drive refresh is always
performed.
Specify: Video & PT drive refresh can be set to a
preferred schedule.
Click Schedule. The Menu for period setting
can be displayed. ("Setting the Schedule —
Schedule Menu" on page 81)
Notes
• Camera operation can be canceled when you run video
& PT drive refresh while operating the camera.
• Position tours stop if video & PT drive refresh is
running while you are running position tours. After
video & PT drive refresh has been completed, the
position tours restart.
• Intelligent motion detection and camera tampering
detection stop immediately if you execute video & PT
drive refresh when Intelligent motion detection and
camera tampering detection are set. After video & PT
drive refresh is completed, motion detection and
camera tampering detection restart.
Format SD memory card
Click Format to format the SD memory card (not
supplied) inserted into the SD memory card slot of the
camera. The files and folders stored in the SD memory
card are deleted while formatting.
Notes
• Before formatting, disable the image memory
function, FTP server function and Edge Storage
function to protect the SD memory card from writing.
• When the SD memory card is write protected, it
cannot be formatted.
Delete custom homepage
Click Delete to delete the homepages recorded in the
flash memory of the camera with Custom Homepage of
SNC toolbox.
34
Configuring the System — System Menu
Delete panorama image
Click Delete to delete the panorama images recorded in
the camera with Panorama Creator of SNC toolbox.
Delete voice alert file
Click Delete to delete all the audio files stored in the
camera using SNC audio upload tool (page 90).
Notes
• Clicking Delete deletes all the stored audio files
simultaneously. To delete a specified audio file only,
perform deletion of the audio file in the corresponding
Voice alert tab of the Voice alert menu (page 78).
• Before deleting the audio file, set Voice alert to Off in
each tab of the Voice alert menu (page 78).
Delete thumbnails
Click Delete to delete the thumbnails set in the Preset
Setting menu.
Delete header logo
Click Delete to delete the header logo set in the Viewer
menu.
Delete superimpose logo
Click Delete to delete the superimposed logo, set in the
Advance of the camera ID on the Superimpose tab of the
System menu, from the camera.
To set whether to show or hide the superimpose logo,
you need to configure the setting under the Superimpose
tab.
OK/Cancel
See "Buttons common to every menu" on page 26.

System log Tab

The data of the software activity of the camera is
recorded in this log. It includes data that is useful if a
problem occurs.
Click Reload to reload the latest data.