Table of Contents
Advertisement
Notes
• Before formatting, set Edge Storage movie and Edge
Storage still image in the Execution Condition tab of
the Action output menu to Off, to write-protect the
memory card.
• Do not activate the Format memory card function
when no card is inserted into the card slot.
Backup setting data
Saves the setting data of the camera in a file.
Click Save, and follow the instructions on the Web
browser to specify the folder and save the setting data of
the camera.
The file name preset at the factory is "snc-vb600.cfg"
for SNC-VB600.
Restore setting
Loads the stored setting data of the camera.
Click Browse... and select the file in which the setting
data is stored. Click OK, and the camera is adjusted
according to the loaded data.
Restore the home position settings and the
privacy masking settings
If you select this, the stored setting data of the camera,
the home position and the privacy masking data are
loaded.
Notes
• With Restore setting, some items in the Network
menu (page 39) cannot be restored.
• The following items cannot be stored or restored with
Backup setting data or Restore setting.
– audio files uploaded using the SNC toolbox
– a certificate to be used in the 802.1X function
– a certificate to be used in the SSL function
– superimpose logo
Focus refresh
Supported models: SNC-VB632D/VB642D/VM630/
VM600/VM600B/VM631/VM601/VM601B/
VM632R/VM602R/VM641/VM642R/EB632R/
EB642R/EM600/EM631/EM601/EM632R/EM602R/
EM641/EM642R/EB602R/EM603
Focus may move slightly due to large impacts to the
camera.
Reset the focus position to the setting position by
performing the refresh operation.
Manual
Click Execute to perform the refresh operation.
Schedule
Specify the time to run refresh if you perform the refresh
action periodically.
Delete voice alert file
Click Delete to delete all the audio files stored in the
camera.
This function is not available for SNC-XM637/XM636/
XM632/XM631.
Notes
• Clicking Delete deletes all the stored audio files
simultaneously. To delete a specified audio file only,
perform deletion of the audio file in the corresponding
Execution Condition tab of the Action output menu
(page 64).
• Before deleting the audio file, set Voice alert to Off in
the Execution Condition tab of the Action output
menu (page 64).
Delete superimpose logo
Click Delete to delete the superimposed logo, specified
by Position in the Superimpose tab of the Video / Audio
menu, from the camera.
To set whether to show or hide the superimpose logo,
you need to configure the setting under the Superimpose
tab.
System log Tab
The data of the software activity of the camera is
recorded in this log. It includes data that is useful if a
problem occurs.
Click Reload to reload the latest data.
Click Log level in the list box to adjust the importance
of information to be recorded in the camera as a system
log.
Set the maximum record number to be recorded in the
camera in Log size.
Log information can be saved as a file by clicking
Download of Download as file.
Access log Tab
The access record of the camera is displayed.
Click Reload to reload the latest data.
Click Log level in the list box to adjust the importance
of information to be recorded in the camera as an access
log.
Set the maximum record number to be recorded in the
camera in Log size.
Log information can be saved as a file by clicking
Download of Download as file.
Configuring the System — System Menu
27
Advertisement
Table of Contents
