Sony HVR-DR60 Service Manual page 18

Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.
1. Attach the sheet (FP-431) to the FP-431 flexible cable of PWB by referring to the figure below.
Sheet (FP-431)
Attach the sheet starting from the
portion shown by the arrows.
2. Attach the sheet (heatsink A) to the heatsink A by referring to the figure below.
Fold back
3. Attach the harness sheet to the battery terminal board and DC-IN connector by referring to the figure below.
Cut the harness sheet into 40 x 40 mm square to use.
Battery Terminal Board
HVR-DR60
Tolerance: 0 to 2 mm
Reference
Heatsink A
Sheet (Heatsink A)
Harness Sheet
1 to 3 mm
HELP
Wind the sheet around the FP-431
mount.
FP-431 Mount.
Attach the slit portion of the
sheet to the bent portion.
Attach the sheet
(Heatsink A) to
standard portion.
DC-IN Connector
Harness Sheet
1 to 3 mm
HELP