Replacement Of Main Parts; Carriage Motor_Replacement - Roland STIKA SX-15 Service Notes

3 Replacement of Main Parts

3 Replacement of Main Parts
Following table describes the necessary adjustment after the replacement of each parts.
Replacement Parts
CARRIAGE MOTOR 1. Motor Backlash Adjustment
Replacement Parts
GRIT MOTOR
3

3-1 CARRIAGE MOTOR_REPLACEMENT

(Referential Time : SX-15 3min. / SX-12/8 5 min.)
Remove the Front Table.
1
Disconnect the Panel cable from the CN2 on the Main
2
Board. Unhook the bottom part of the Right Side Cover
from the Frame and then, remove it.
8
Necessary Adjustment
Necessary Adjustment
1. Motor Backlash Adjustment
Front Table
Right Side Cover
CN2