Gateway Profile 4 User Manual page 221

4
Align the notch on the new memory module with the notch on the
memory module bank and press firmly into the bank. The tabs on the sides
of the memory module should secure the memory module automatically.
When the module is secure, you hear a click.
5
Close the case by following the instructions in "Closing the computer case"
on page 200.
6
Turn on your computer. Windows starts and the Windows desktop appears.
7
In Windows XP, click
(if in Category View). Click/Double-click
Maintenance
of memory in your computer is shown at the bottom of the System Properties
window in the General tab.
- OR -
In Windows 2000, right-click the
The amount of memory in your computer is shown at the bottom of the
System Properties window in the General tab.
, , then click
Start Control Panel
My Computer
www.gateway.com
Installing or replacing DIMM memory
Performance and
. The amount
System
icon, then click
Properties
.
213