Korg CX-3 Owner's Manual page 28

Parameters
Merge Lower Msg (Merge Lower Message)
On: MIDI messages of the channel specified by the
Global mode Group 2 "MIDI Lower Rx Ch" parameter
will be converted to the channel specified by the
Global mode Group 2 "MIDI Lower Tx Ch" and
transmitted.
Group 5
CC# Upper DB Sel (MIDI Control Change Assign for
Upper Drawbar Select)
Specify the MIDI control change number that will be
used to transmit and receive the UPPER setting of the
DRAWBAR SELECT section. (The factory setting is
79.)
CC# Lower DB Sel (MIDI Control Change Assign for
Lower Drawbar Select)
Specify the MIDI control change number that will be
used to transmit and receive the LOWER setting of the
DRAWBAR SELECT section. (The factory setting is
80.)
CC# DB1–1 (MIDI Control Change Assign for Drawbar
1–16')
Specify the MIDI control change number that will be
used to transmit and receive the 16' setting of Draw-
bar 1. (The factory setting is 16.)
CC# DB1–2 (MIDI Control Change Assign for Drawbar
1–5-1/3')
Specify the MIDI control change number that will be
used to transmit and receive the 5-1/3' setting of
Drawbar 1. (The factory setting is 17.)
CC# DB1–3 (MIDI Control Change Assign for Drawbar
1–8')
Specify the MIDI control change number that will be
used to transmit and receive the 8' setting of Drawbar
1. (The factory setting is 18.)
CC# DB1–4 (MIDI Control Change Assign for Drawbar
1–4')
Specify the MIDI control change number that will be
used to transmit and receive the 4' setting of Drawbar
1. (The factory setting is 19.)
CC# DB1–5 (MIDI Control Change Assign for Drawbar
1–2-2/3')
Specify the MIDI control change number that will be
used to transmit and receive the 2-2/3' setting of
Drawbar 1. (The factory setting is 20.)
CC# DB1–6 (MIDI Control Change Assign for Drawbar
1–2')
Specify the MIDI control change number that will be
used to transmit and receive the 2' setting of Drawbar
1. (The factory setting is 21.)
CC# DB1–7 (MIDI Control Change Assign for Drawbar
1–1-3/5'')
Specify the MIDI control change number that will be
used to transmit and receive the 1-3/5' setting of
Drawbar 1. (The factory setting is 22.)
24
[Off, On]
[1...31, 33...95, Off]
[1...31, 33...95, Off]
[1...31, 33...95, Off]
[1...31, 33...95, Off]
[1...31, 33...95, Off]
[1...31, 33...95, Off]
[1...31, 33...95, Off]
[1...31, 33...95, Off]
[1...31, 33...95, Off]
CC# DB1–8 (MIDI Control Change Assign for Drawbar
1–1-1/3')
Specify the MIDI control change number that will be
used to transmit and receive the 1-1/3' setting of
Drawbar 1. (The factory setting is 23.)
CC# DB1–9 (MIDI Control Change Assign for Drawbar
1–1')
Specify the MIDI control change number that will be
used to transmit and receive the 1' setting of Drawbar
1. (The factory setting is 24.)
CC# DB2–1 (MIDI Control Change Assign for Drawbar
2–16')
Specify the MIDI control change number that will be
used to transmit and receive the 16' setting of Draw-
bar 2. (The factory setting is 70.)
CC# DB2–2 (MIDI Control Change Assign for Drawbar
2–5-1/3')
Specify the MIDI control change number that will be
used to transmit and receive the 5-1/3' setting of
Drawbar 2. (The factory setting is 71.)
CC# DB2–3 (MIDI Control Change Assign for Drawbar
2–8')
Specify the MIDI control change number that will be
used to transmit and receive the 8' setting of Drawbar
2. (The factory setting is 72.)
CC# DB2–4 (MIDI Control Change Assign for Drawbar
2–4')
Specify the MIDI control change number that will be
used to transmit and receive the 4' setting of Drawbar
2. (The factory setting is 73.)
CC# DB2–5 (MIDI Control Change Assign for Drawbar
2–2-2/3')
Specify the MIDI control change number that will be
used to transmit and receive the 2-2/3' setting of
Drawbar 2. (The factory setting is 74.)
CC# DB2–6 (MIDI Control Change Assign for Drawbar
2–2')
Specify the MIDI control change number that will be
used to transmit and receive the 2' setting of Drawbar
2. (The factory setting is 75.)
CC# DB2–7 (MIDI Control Change Assign for Drawbar
2–1-3/5'')
Specify the MIDI control change number that will be
used to transmit and receive the 1-3/5' setting of
Drawbar 2. (The factory setting is 76.)
CC# DB2–8 (MIDI Control Change Assign for Drawbar
2–1-1/3')
Specify the MIDI control change number that will be
used to transmit and receive the 1-1/3' setting of
Drawbar 2. (The factory setting is 77.)
CC# DB2–9 (MIDI Control Change Assign for Drawbar
2–1')
Specify the MIDI control change number that will be
used to transmit and receive the 1' setting of Drawbar
2. (The factory setting is 78.)
[1...31, 33...95, Off]
[1...31, 33...95, Off]
[1...31, 33...95, Off]
[1...31, 33...95, Off]
[1...31, 33...95, Off]
[1...31, 33...95, Off]
[1...31, 33...95, Off]
[1...31, 33...95, Off]
[1...31, 33...95, Off]
[1...31, 33...95, Off]
[1...31, 33...95, Off]