Korg D1600 Owner's Manual page 71

The longer the import source file, the more
time this operation will take before the "Com-
pleted" message appears.
6 Register the TO time location.
7 Select the Copy command.
In the [TRACK] "EditTrk" tab page, set "EditType"
to "CopyTrack."
8 Select the clipboard as the copy source track num-
ber.
Set "SourceTrack" to "Clip1." The number indi-
cates the number of tracks in the clipboard.
9 Select the copy destination track number.
Set "DestTrack" to track number "1."
0 Specify the number of times that the data will be
copied.
Set "Times" to "1."
A Execute the copy operation.
Press the "Exec." button. Reply "Yes" to the "Are
YouSure?" prompt. When the operation is com-
pleted, the display will indicate "Completed."
Press the "OK" button.
The data will be overwritten onto the copy
destination track.
B Verify the results.
Press the [TO/LOC3] key, play back from the TO
location, and listen to the data to verify that the
import was performed correctly. If necessary, you
can use Undo to return to the previous state.
Exporting to a WAV file
Here's how the IN–OUT region of data of tracks 1 and 2
from song 001 can be exported as a stereo WAV file
named "Sound001.wav" to a DOS format external drive
"A:DOS" connected to the SCSI connector.
1 Select song 001.
2 Register the IN and OUT time locations. ( p.97)
3 Select the Copy command.
In the [TRACK] "EditTrk" tab page, set "EditType"
to "CopyTrack."
4 Select the copy source track number.
Set "SourceTrack" to track numbers "1–2."
5 Select the clipboard as the copy destination track
number.
Set "DestTrack" to "Clip."
6 Execute the Copy command.
Press the "Exec." button. Reply "Yes" to the "AreY-
ouSure?" prompt. When the Copy operation is
completed, the display will indicate "Completed."
Press the "OK" button.
7 Select the Export command.
Select the [TRACK] "Export" tab page.
8 Select the export destination drive.
Press the "DriveList" button to access the dialog
box. Select the DOS format drive. In this example,
select drive "A." Then press the "OK" button to
return to the [TRACK] "Export" tab page.
9 Assign a name to the WAV file.
Press the "Rename" button to access the dialog
box, and modify the name. You can input a name of
up to eight characters.
The filename extension of .WAV will be input
automatically.
0 Input the date and time for the WAV file.
Press the "Date" button to access the dialog box,
and enter the year, month, date, hour, minute, and
second.
A Execute the Export command.
If you are exporting a 24 bit song as a 16 bit
WAV file, make settings for "Bit" and "Dither."
( p.88)
Press the "Exec." button. Reply "Yes" to the "AreY-
ouSure?" prompt. When the Export operation is
completed, the display will indicate "Completed."
Press the "OK" button.
The Export operation cannot be executed if an
identically-named WAV file already exists.
69