Importing/Exporting Wav Files - Korg D1600 Owner's Manual

Exchanging removable disks
If the currently selected song is on a removable disk,
use the following procedure to exchange disks.
1 Access the [SYSTEM] "DiskUtil" tab page.
Use "DriveID" to select the drive.
2 For "SelOperation," select "EjectRMD."
3 Press the "Exec." button.
The disk will be ejected, and the internal drive will
be selected.
4 Insert another disk into the removable disk drive.
If you are using a playable disk, use the [SONG]
"SelSong" tab page to re-select the drive before
selecting the song.
4. Importing/exporting WAV files
WAV format audio files from an external drive con-
nected to the [SCSI] connector or from ISO 9660 format
CD media can be imported (loaded) into the D1600.
Also, audio data in the clipboard of the D1600 can be
exported (written) as a WAV format file to an external
DOS format (FAT 16) SCSI drive.
WAV files of the following formats can be imported.
Sampling frequency: 44.1 kHz
Quantization: 8 bit, 16 bit, 24 bit
Number of channels: 1 (monaural), 2 (stereo)
Disk format: FAT 16 (DOS format), or ISO 9660 Level 1
for a CD
Importing a WAV file into the beginning of a track
Here's how a monaural WAV file named
"Sound001.wav" can be imported into the beginning of
track 1 from a DOS format external drive "A:DOS" con-
nected to the [SCSI] connector.
1 Select the Import command.
Access the [TRACK] "Import" tab page.
2 Select the import source drive.
Press the "DriveList" button to access the dialog
box. Select a DOS format drive that contains the
desired WAV file. In this example, select drive "A."
Then press the "OK" button to return to the
[TRACK] "Import" tab page.
68
3 Select the WAV file.
Press "WavFileList" button to access the dialog
box. In this example, select "A:Sound001.wav."
Then press the "OK" button to return to the
[TRACK] "Import" tab page.
When importing from a CD, sub-directories
are also supported. When importing from
another type of SCSI drive, only WAV files
saved in the root directory are supported.
You can use the "Prvw" button to preview the first
two seconds of the selected WAV file.
4 Select the import destination track number.
Set "DestTrack" to track number "1."
5 Execute the Import command.
Press the "Exec." button. Reply "Yes" to the "AreY-
ouSure?" prompt. When the operation is com-
pleted, the display will indicate "Completed."
Press the "OK" button.
6 Verify the results of the import.
Hold down the [STOP] key and press the [REW]
key to return to the beginning of the song, and lis-
ten to the data to verify that the import was per-
formed correctly. If necessary, you can use Undo to
return to the previous state.
The longer the import source file, the more
time this operation will take before the "Com-
pleted" message appears.
Importing a WAV file into the middle of a track
Here's how a monaural WAV file named
"Sound001.wav" can be imported once into the TO
location of track 1 from a DOS format SCSI drive
"A:DOS" connected to the SCSI connector.
1 Select the Import command.
Access the [TRACK] "Import" tab page.
2 Select the import source drive.
Press the "DriveList" button to access the dialog
box. Select a DOS format drive that contains the
desired WAV file. In this example, select drive "A."
Then press the "OK" button to return to the
[TRACK] "Import" tab page.
3 Select the WAV file.
Press "WavFileList" button to access the dialog
box. In this example, select "A:Sound001.wav."
Then press the "OK" button to return to the
[TRACK] "Import" tab page.
When importing from a CD, sub-directories
are also supported. When importing from
another type of SCSI drive, only WAV files
saved in the root directory are supported.
4 Select the clipboard as the import destination
track number.
Set "DestTrack" to "Clip."
5 Execute the Import command.
Press the "Exec." button. Reply "Yes" to the "AreY-
ouSure?" prompt. When the operation is com-
pleted, the display will indicate "Completed."
Press the "OK" button.