Rear - AOR AR2300 Operating Manual

1-5 Rear panel
1. Antenna connector 1 (N type) for above 25MHz
2. Antenna connector 2 (N type) for all frequencies
3. External 10MHz reference signal input connector (SMA type) (2dBm +/- 2dB)
4. Cable clamp
5. Power input connector (10.7~16V DC, 2A @ 12V)
6. 45.05MHz IF output connector (BNC type) (25MHz to 3.15GHz only)
7. ACC (Accessory) connector
When a GPS receiver is connected, the internal reference oscillator (10MHz) will be locked by the GPS receiver, and
the highest stability reference signal (0.01ppm) will be obtained. This is ideal for frequency coherent operation and DF
(Direction Finding) applications.
8.
9.
10. N/A (for future use)
11. I/Q output connector (Optional, USB type B connector) (25MHz to 3.15GHz only)
12. AUX (Auxiliary connector) Interface for an optional LAN interface
13. USB connector (USB type B connector)
13
Pin #
1 12V DC output (30mA max.)
2
3
4
External speaker output connector (3.5mm monaural)
Line output connector (3.5mm stereo, -10dBm/600Ω). Can be selected as 12kHz
I/Q output
Description
Detector output
Audio input
Control 1
Pin # Description
5 Control 2
6 GPS 1 second input
7 Audio output (2.5mV/600Ω)
8 Ground