Exterior Lighting And Signals - Renault LAGUNA Handbook

EXTERIOR LIghTINg ANd sIgNALs

1 2
3
u
side lights
Turn the ring 2 until the symbol
is opposite mark 3.
The instrument panel will light up. The
brightness can be adjusted by turning
the control knob 4.
4
k
dipped beam
headlights
manual operation
Turn the ring 2 until the symbol is oppo-
site mark 3. This indicator light on the
instrument panel comes on.
Automatic operation
(depending on vehicle)
Turn ring 2 until the AUTO symbol is op-
posite mark 3: with the engine running,
the dipped beam headlights switch on
or off automatically depending on the
brightness of the light outside, without
touching stalk 1.
daytime running lights
1
function
(only relates to front lights)
Depending on the vehicle, the lights
come on without using stalk 1 when the
engine is started. To activate or deacti-
vate this function, refer to the informa-
tion on the "Vehicle settings personali-
sation menu" in Section 1.
á
main beam headlights
With the dipped beam head-
lights lit, pull stalk 1 towards you. This
indicator light on the instrument panel
comes on.
To return to the dipped headlight posi-
tion, pull stalk 1 towards you again.
Before driving at night:
check the electrical equip-
ment is operating correctly,
and depending on the vehi-
cle, adjust your headlights (if your ve-
hicle is not carrying its normal load).
As a general precaution, check that
the lights are not obscured (by dirt,
mud, snow or objects being trans-
ported).
1.65