Canon imageCLASS MF4890dw Starter Manual page 20

Confi guring the Fax
(MF4890dw/MF4870dn/MF4750 Only)
Register the Fax Number and Unit Name
Set Up 1
Perform fax setup?
Set up Now
Set up Later
• If you select <Set up Later>, the receive mode
will be set to <Auto>.
• To reconfi gure the settings, select [Menu] →
<Fax TX Settings> → <Fax Setup Guide>.
Register the unit
telephone number for
this machine.
*Next Screen: Press OK
Register Unit Tel No.
031234567
<Apply>
+
• Enter the telephone number using the numeric
keys.
Register Unit Tel. No.
031234567
<Apply>
+
• Press [▲] or [▼] to highlight <Apply>, and then
press [OK].
20
Downloaded from ManualsPrinter.com Manuals
Register unit name.
(Sender name,
company name, etc.)
*Next Screen: Press OK
Register Unit Name
ABC
<Apply>
Entry Mode: A
• By referring to "Entering Text" (P.35), enter the unit
name.
Register Unit Name
ABC
<Apply>
Entry Mode: A
• Press [▲] or [▼] to highlight <Apply>, and then
press [OK].
Set the RX mode.
Answer the following
questions to select
the appropriate mode.
*Next Screen: Press OK
• Do not operate the machine when this screen
appears and proceed to the next page.
Registered information will be printed on the recipient's
paper.
The fax number and unit name registered here will
be printed on the recipient's paper as the sender
information.
Fax Number
Number's Type
Unit Name
Sent Time
Page Number