Assembly; Install Blower Pipes - Echo PB-410 Operator's Manual

10
A
SSEMBLY
Never perform maintenance or assembly procedures with engine
running or serious personal injury may result.

INSTALL BLOWER PIPES

1. Assemble throttle lever bracket to the fan case using four screws.
Set top lead into the recess of bracket.
2. Assemble clamps onto both ends of flexible pipe, large clamp to
wide end and small clamp to narrow end.
3. Assemble straight pipe with swivel into flexible pipe.
4. Assemble flexible pipe to elbow on blower.
NOTE
A light lubricant may be used to ease assembly of flexible pipe to
blower elbow.
5. Tighten clamps.
6. Loosen wing nut completely and expand stick handle clamp.
7. Align notches in handle clamp with pipe pegs. Stick handle should
be angled away from operator.
8. Slide stick handle onto pipe with swivel.
9. Position stick handle for comfortable operation, and tighten wing
nut.
10. Assemble straight pipe to pipe with swivel, turning straight pipe
sclockwise to lock in place.
11. Assemble curved pipe to straight pipe turning straight pipe
clockwise to lock in place.
WARNING
Screws
Stick handle
Flexible pipe
Notch
Pipe pegs
Swivel tube
Stop lead
Clamp
Elbow
Pipe
Stick handle
Wing nut