Konica Minolta C200 Scanning Manual page 19

8) Ensure that 'E-mail TX Setting' and 'Scan to E-mail' are turned 'ON'
9) Enter in the IP address or Host Name of the E-mail server
10) Enter a 'Device Mail Address'
11) If required, turn on 'SMTP Authentication' and enter a user name and
password of a user set up on the e-mail server.
need to use this setting, that a new e-mail account for the Konica Minolta device
is created on the e-mail server.
12) Ensure that 'Binary Division' is turned 'OFF'
13) Click 'OK' and log out of Administrator Mode
CREATING A ONE TOUCH BUTTON
1) Log in to the web interface as a 'Public User'
2) Click on the 'Store Address' tab
3) Click on 'New Registration' and choose 'E-mail' from the next screen.
4) Enter a 'Name' for your button. (This is the name of the button that will
appear on the machine.
* Choose the 'Index' under which this button will appear
* Enter the e-mail address of the recipient
5) Click 'OK' and then 'OK' again
Your button is now configured.
It is recommended that if you
19
Konica Minolta Hotline Support (UK)
Created by Hotline Support