Konica Minolta bizhub 40p User Manual page 81

HOLD
JOB
TIME
OUT
ENERGY
SAVER
TIME
MENU
TIME
OUT
LCD
CON-
TRAST
SECU-
RITY
Configuration Menu Overview
Settings
DISABLE/1 hour/4 hours/1 day/
1 week
Specify the length of time until print jobs saved on the hard disk
are deleted. If
DISABLE
at a specific time.
Settings
5 minutes/6 minutes/7 minutes/8
minutes/9 minutes/10 minutes/11
minutes/12 minutes/13 minutes/14
minutes/15 minutes/30 minutes/1
hour
Specify the length of time until the machine enters Energy
Saver mode.
Settings
OFF/1 minute/2 minutes
Specify the length of time until the status screen is displayed
when no operation is performed while a menu or help screen is
displayed in the message window. If
timeout occurs.
Settings
-3/-2/-1/0/+1/+2/+3
Adjust the contrast of the message window.
The darkest level setting is
.
+3
Specify the password for locking the control panel.
CHANGE
PASS-
If the password is set to
WORD
panel is not locked. In order to lock the control panel,
be sure to specify a password other than
Settings
LOCK
PANEL
Specify how the control panel is locked.
If
OFF
If
MINIMUM
and
SYS DEFAULT MENU
password.
If is selected, all menus are protected with a
ON
password.
In order to lock the control panel, be sure to specify a
password other than
is selected, print jobs are not deleted
and the brightest level setting is
-3
0000
OFF/MINIMUM/ON
is selected, the control panel is not locked.
is selected, the
0000
is selected, no
OFF
(default), the control
0000
INTERFACE MENU
are protected with a
.
.
71