System Requirements Pc/At - Minolta Dimage Scan Elite F-2900 Instruction Manual

SYSTEM REQUIREMENTS – PC AT
CPU:
Operating System:
Memory:
Hard Disk Space:
SCSI Board:
Monitor:
Other:
IBM PC/AT compatible with An Intel Pentium or later processor
or better.
An Intel Pentium or later when Windows NT 4.0 is installed.
• Support cannot be provided for custom or home built machines.
Windows 95 (incl. OSR2), Windows 98, or Windows NT 4.0.
A minimum of 32 MB RAM.
90 MB of available hard disk space.
The following Adaptec SCSI boards are recommended for this
device:
AVA-1505AE
AHA-1520B
AHA-2940J
AHA-2940AU
AHA-2910B
• The AHA-2940N SCSI board has been tested and approved for use
on NEC PC-9821 series machines.
• Do not use AVA-1505AE, AHA-1520B, and AHA-1540CP SCSI
boards with NEC PC98NX Series machines.
• Support will not be provided for malfunctions or problems caused by
the use of untested SCSI boards.
• Depending upon the SCSI board an optional adaptor may be
required.
XGA (1024 x 768) or better. VGA (640 x 480) can be used.
TWAIN driver is compatible with Photoshop ver. 3.05, 4.0.1, and
5.0.2.
Photoshop LE Ver. 5.0
Paint Shop Pro 5.0E, Corel Photo Paint 8.
AVA-2902E
AHA-1540CP
AHA-2940U
AHA-2940W
AHA-2910C
2
AHA-1510B
AHA-2940
AHA-2940N
AHA-2940UW
AHA-2920C