Installing The Program Package; Prerequisites For Installation; Installation; Check Installation Is Successful - Siemens Gigaset M 101 Data Operating Instructions Manual

Installing the program package

Prerequisites for installation

Installation

Check installation is successful

For installation, you need:
an IBM-compatible PC with the following configuration:
– Win 95, Win 98 or Win NT operating system
– 2 MB free hard disk memory
– 1 free V.24/RS232 serial interface as
COM port
the diskette/CD-ROM containing the installation program
Start up the PC and close down any programs active after
start-up.
Disconnect any Gigaset M101 Data units from the power
supply and the PC.
Insert the data carrier supplied in the drive.
Under Start, select Settings, then Control Panel. Double-
click the Software icon.
Select Install. The installation program starts. During instal-
lation, the message "No Gigaset M101 Data connected".
Confirm this message with "OK".
Terminate the configuration program with "OK"; this con-
cludes the installation operation.
The following errors can occur during installation:
Problem
Insufficient memory
No COM port free at the
PC
Installation interrupted by
user
PC crashes during
installation
Installation of a new
version
If no errors occur, all files are installed in the selected language
version and your PC contains a "Gigaset M101 Data" program
group. This contains the "Set Gigaset" configuration program, a
help function and a text file with current information.
Putting into service
Result
Error message, please try free-
ing some disk space on your
hard drive.
Error message, setup can be
completed.
All components already in-
stalled are removed.
Automatic correction during
next attempt.
Recognition, warning and instal-
lation after confirmation.
9