Miscellaneous - Siemens Gigaset M 101 Data Operating Instructions Manual

Fault
Faxes are distorted when sent
with ELSA Microlink 56k and
WinFax 8.0 software.

Miscellaneous

Fault
Monitor fault when Gigaset
M101 Data is active (e.g. slight
flickering or moiré effect).
A slight humming can be heard
in the loudspeakers connected
to the sound card when Gigaset
M101 Data is active.
Issued by
Information and Communication Products
Hofmannstraße 51, D-81359 München
Siemens Aktiengesellschaft
http://www.siemens.de/gigaset
Cause
Incorrect driver for voice func-
tions set under WinFax 8.0.
Cause
DECT HF wanted signal is influ-
encing the monitor.
DECT HF wanted signal is de-
modulated by the analog com-
ponents of the sound card or
the amplifiers of active speakers
and thus produces a humming
sound.
Tips & tricks, settings
Solution
During installation, WinFax 8.0
requires a modem driver to be
selected for voice functions; the
Generic / Rockwell Fax/Voice
driver is to be used here accord-
ing to ELSA AG.
Solution
Move Gigaset M101 Data along
the longitudinal axis until the in-
terference disappears. Move Gi-
gaset M101 Data further away
from the monitor.
Move Gigaset M101 Data along
the longitudinal axis until the in-
terference disappears. Move Gi-
gaset M101 Data further away
from the sound card/loudspeak-
ers.
© Siemens AG 1999. All rights reserved.
Subject to availability.
Right of modification reserved.
Ref. no.: A30853-X400-B104-3-74D1
Printed in Germany
04/99
37