Video Output; Viewing Images On A Television - Konica Minolta DiMAGE X50 Instruction Manual

VIDEO OUTPUT

Camera images can be displayed on a television. The video output can be changed
between NTSC and PAL in section 3 of the setup menu. North America uses the NTSC
standard and Europe uses the PAL standard. Check which standard is used in your
region to play back images on your television set.

VIEWING IMAGES ON A TELEVISION

The supplied AV cable is used to view camera images on your television.
2
3
78 S
ETUP MODE
1.Turn off the television and the camera.
2.Slide the terminal cover open. Insert the small plug of the
AV cable into the camera's AV-out terminal. The arrow
mark on the plug should face the front of the camera.
3.Plug the other end of the AV cable into the video and
audio input terminals on the television. The yellow plug
is for the video output. The white plug is for the monaural
audio output.
4.Turn the television on.
5.Change the television to the video channel.
6.Press and hold the playback button until the playback
6
display is visible on the television screen. The camera's
monitors do not activate when the camera is attached to
a television.
7.View images as described in the playback section.