Frame Capture - Konica Minolta DiMAGE X50 Instruction Manual

FRAME CAPTURE

The frame-capture option in section 2 of the playback menu
allows a single frame from a movie clip can be copied and
save as a still image. The copied image has the same image
size as the original movie.
The movie from which the frame is to be captured must first
be displayed in the playback mode before opening the
playback menu. Highlight "Enter" in the frame-capture option
and press the center button of the controller to open the
capture screen.
Use the left/right keys of the controller to display
the frame to be captured.
Press the central button of the controller to
capture the frame; a confirmation screen
appears. Choosing "Yes" executes the operation,
"No" cancels it.
The audio from approximately 7.5 seconds before and after the
point of the captured frame can be saved. Choosing "Yes" records
the movie soundtrack and saves it as an audio-caption WAV file.
Selecting "No" records no soundtrack.
When saved, the file names of the captured
image and sound track are displayed. Press the
center button of the controller to complete the
operation.
Slide show –
Dissolve On
Crop frame –
Frame capture –
Edit movie –
Rwd Fwd Save
Save audio?
Yes No
Saved as PICT0035.JPG.
PICT0035.WAV.
OK
Rwd Fwd Save
65