Custom Key Function; Auto Reset - Konica Minolta DiMAGE X50 Instruction Manual

CUSTOM KEY FUNCTION

In the recording mode, a function can be assigned to the
left/right keys of the controller. This function is specified in
section 1 of the recording menu (p. 40). This function cannot
be used with the movie/audio mode or digital subject
programs. Refer to the following sections for information on
exposure compensation (p. 48), white balance (p. 44),
camera sensitivity (p. 46), and color mode (p. 43).

AUTO RESET

When auto reset is active, the following functions reset when the camera is turned off.
This function can be turned off in section 2 of the recording menu (p. 40).
Flash mode (p. 28)
Drive mode (p. 37)
White balance (p. 44)
Camera sensitivity (p. 46)
Exposure compensation (p. 48)
Metering mode (p. 47)
Color mode (p. 43)
AF area (p. 31)
Monitor display (p. 29)
In the recording mode, use the left/right controller
keys to change the function set with the menu.
The LCD monitor displays the settings as they are
changed. The changes are visible in the monitor
image. The function is set automatically after five
seconds or when another camera button is pressed.
Autoflash
Single-frame advance
Auto
Auto
0.0
Multi-segment
Color
Wide focus frame
Full display
Image size Exp. Comp.
Quality White balance
White balance Sensitivity
Color
Key func.
Off
The flash mode is reset to
autoflash or autoflash with
red eye reduction
depending on which of
those two flash modes were
last set.
45