Table of Contents
Advertisement
VIEWING IMAGES ON A TELEVISION
It is possible to view camera images on your television. The camera has a video-out terminal which
can be used to connect the camera to a television using the supplied AV cable. The camera is com-
patible with the NTSC and PAL standards. The video-output setting can be checked and set in the
advanced 2 section of the setup menu (p. 118).
1.
Turn off the television and the camera.
2.
Insert the mini-plug end of the AV cable into the camera's
AV-out terminal.
3.
Plug the other end of the AV cable into the video and
audio input terminal on the television. The yellow plug is
for the video output, and the white plug is for the monaur-
al audio output.
4.
Turn the television on.
5.
Change the television to the video channel.
6.
Turn the camera's mode dial to the playback position. The
camera's monitors will not activate when the camera is
attached to a television. The playback-mode display will
be visible on the television screen.
7.
View images as described in the playback section. Use the television controls to adjust the vol-
ume of the audio playback. Because of the broadcast standard used to display television images,
image quality and resolution will appear lower than when displayed on a computer monitor.
2
3
39
Advertisement
Table of Contents
