Electronic Keyboard - Minolta MM-A208 Instruction Manual

ELECTRONIC KEYBOARD

The electronic keyboard is used to enter text for imprinting data or for naming new folders. The key-
board automatically appears when text needs to be entered.
To enter text,
Text block Delete key Case key
simply use the
four-way keys of
Rec. Text input
the controller to
highlight the
desired character
and then press the cen-
tral button of the controller
to enter it. Entering the case key will
switch between upper and lower
case; the change is immediately
displayed on the keyboard. When
complete, highlight the enter key
and press the controller to enter the
text and complete the operation. To
cancel the operation, press the
menu button.
select enter
Enter key
To delete text, move the cursor into the text block at the top of the screen. Use the cursor to highlight
the character to be deleted. Press the down key; the delete key will be highlighted. Press the center
of the controller to delete the character.
To replace a character, repeat the previous procedure, but when the delete key is highlighted, use
the four-way keys to highlight the character to replace the one highlighted in the text box; press the
controller to replace the character.
82 R
ECORDING MODE MENU