Viewing Images On A Television - Minolta Dimage Z1 Instruction Manual

Viewing images on a television

It is possible to view camera images on your television. The camera has a video-out terminal to make
the connection using the supplied AV cable. The camera is compatible with the NTSC and PAL stan-
dards. The video-output setting can be checked and set in section 4 of the setup menu (p. 83).
2
3
82
A
DVANCED PLAYBACK
1. Turn off the television and the camera.
2. Insert the small plug of the AV cable into the camera's AV-out
terminal.
3. Plug the other end of the AV cable into the video and audio
input terminals on the television. The yellow plug is for the
video output. The white plug is for the monaural audio output.
4. Turn the television on.
5. Change the television to the video channel.
6. Turn the camera's mode dial to the playback position and turn
on the camera. The camera's monitors will not activate when
the camera is attached to a television. The playback-mode
display will be visible on the television screen.
7. View images as described in the playback section.