Minolta DYNAX 3 Instruction Manual page 54

CUSTOM FUNCTIONS
Resetting All of the Custom Functions to Default
You can reset all of the custom functions to their default settings (1).
1
Turn the main switch to OFF.
2
Turn the function dial to CUST.
While pressing the function button, slide the main
3
switch from OFF to ON.
• When the camera turns on,
on the data panel while the function button
is pressed.
Custom 1 - AF / Shutter-release Priority
(1) AF priority
Shutter will not release until or
(2) Shutter-release Priority
Shutter releases even if the focus cannot be confirmed. Use shutter-
release priority when photographing moving subjects.
• When continuous-advance mode is selected, the camera will not update
the focus while the shutter-release button is pressed.
Custom 2 - Film Rewind Start
(1) Automatic
Film is automatically rewound at the end of the roll.
(2) Manual
The manual-rewind button must be pressed to initiate rewind (p. 26).
106
will blink
appears in the viewfinder.
Custom 3 - Film Tip
(1) Film Tip Rewound
Film is completely rewound into the cartridge.
(2) Film Tip Left Out
The film leader is exposed after rewind.
• Sliding the main switch to OFF during rewinding causes the film tip to be
rewound into the cartridge when the camera is turned on again.
Custom 4 - DX Memory
(1) DX Memory Off
Film speed is always set to the DX-coded ISO of the film. Non-DX-coded
film is set to the ISO of the previous DX-coded roll.
(2) DX Memory On
Manual changes to the film speed of a DX-coded film are saved and
applied to future rolls with the same DX-coded ISO. Use when a
particular film is consistently pushed or pulled in its processing.
• For setting the film speed manually, see page 84.
Custom 5 - Shutter-release Lock (Film)
(1) Shutter-release Lock Off
Shutter can be released even if there is no film in the camera.
(2) Shutter-release Lock On
Shutter cannot be released unless film is loaded.
• When film is not loaded, if the shutter-release button is pressed all the way
down, 0 will blink in the viewfinder and on the data panel.
• While the back cover is open, the shutter can be released.
107