Table of Contents
Advertisement
PictBridge
Confirm the transfer-mode option in section 4 of the setup menu is
set to PictBridge. To print the images in the camera's internal memo-
ry, remove the memory card from the camera. Connect the camera
to a PictBridge compatible printer using the camera's USB cable.
The larger plug on the cable is connected to the printer. Open the
USB port/Video-out terminal cover and insert the smaller plug of the
cable into the camera. Turn the camera on; the PictBridge screen is
displayed automatically.
Individual still images can be selected for printing on the PictBridge
screen. For other printing options, see the menu navigation section
on page 110.
The information (i
+
) button switches between the single frame and
index playback formats on the PictBridge screen. Enlarged playback, activated with the zoom lever,
can be used to examine image files on the screen.
Total number of prints
Number of copies
:move
:select
:print
Repeat the previous steps until all the images to be printed are selected. Press the cen-
tral button of the controller to continue.
108
D
-
ATA
TRANSFER MODE
Use the left/right keys of the controller to display
the image to be printed.
Press the up key to select the number of copies
to be printed. To deselect an image for printing,
press the down key until the number of copies
reaches zero.
No. of prints:
7
The number of prints in the print run are displayed as well as the
Print size:
Printer setup
print parameters selected with the menu. See the menu navigation
section for more information (p. 110). Press the central button of
Layout:
Printer setup
the controller to begin printing, or press the menu button to return
Print quality:
Printer setup
to the PictBridge screen.
Data print:
Printer setup
:Start
Once printing begins, the operation can be canceled by pressing the
center of the controller. The printing-finished message indicates the end
of the operation; turn the camera off to end the routine.
Notes on printing errors
If the battery is exhausted before the print run is complete, printing is canceled. Use a fully-charged
battery or the optional AC adapter.
If a minor problem occurs during printing, such as the paper runs out, follow the procedure recom-
mended for the printer; no action is required for the camera. If a major printer error occurs, press
the center of the controller to end the routine. Refer to the printer manual for the correct procedure
for the printer problem. Check the printer settings before starting again and deselect the images
that were printed.
Printing finished.
OK
109
Advertisement
Table of Contents
