Advanced Recording; Recording Mode Display; Macro - Konica Minolta DiMAGE Z20 Instruction Manual

ADVANCED RECORDING

This section cover the advanced recording features of this camera. Read the basic recording sec-
tion before moving on to this section.

Recording mode display

A. Focus frame
B. Spot metering area (p. 58)
34 A
DVANCED RECORDING
1. Wide-angle converter indicator (p. 90)
2. Mode indicator
3. Flash-mode indicator (p. 26)
4. Flash-compensation display (p. 57)
5. Sharpness display (p. 61)
6. Contrast display (p. 60)
7. White-balance indicator (p. 55)
8. Camera-sensitivity (ISO) display (p. 59)
9. Exposure-compensation display (p. 41)
10. Camera-shake warning (p. 27)
11. Exposure-mode indicator (p. 36 - 38)
12. Metering-mode indicator (p. 58)
13. Shutter-speed display
14. Aperture display
15. Macro-mode indicator (p. 35)
16. Focus-mode indicator (p. 54)
17. Date-imprinting indicator (p. 93)
18. Frame counter (p. 52)
19. Drive-mode indicator (p. 45)
20. Manual-focus scale (p. 54)
21. Battery-condition indicator (p. 14)
22. Image-quality indicator (p. 51)
23. Image-size display (p. 51)
24. Digital-zoom display (p. 53)
25. Color-mode indicator (p. 60)
Internal-memory indicator
The internal-memory indicator appears when a memory card is not inserted in the
camera.

Macro

Macro mode allows the camera to focus as close as 1 cm (0.4
in.) from the front of the lens or 8 cm (3.1 in.) from the CCD.
The focus range changes with the zoom 's focal length, see
below.
Press the macro button (1) to select the macro mode. Press the
macro button again to cancel the macro mode.
The following chart lists the macro ranges. All distances are
measured from the CCD.
Macro indicator
Wide-angle position: 8 - 107cm (3.1 - 42.1 in.)
26.5 - 30.8mm: 107 - 237cm (42.1 - 93.3 in.)
1
Telephoto position: 67 - 207cm (26.3 - 81.5 in.)
Approximate location of CCD
plane
35