Yamaha VK10W Supplementary Service Manual page 85

1 Headlight sub-wire harness
2 Fasten the headlight sub-wire
harness at the white tape with
the holder on the shroud.
3 Fasten the headlight sub-wire
harness with the holder.
4 Shroud stopper
5 Pass the headlight sub-wire har-
ness inside of the shroud stop-
per.
6 Fasten the headlight sub-wire
harness and lead at the tape with
the plastic band. After connect-
ing the coupler, install the rubber
cover securely.
7 Install the meter assembly cou-
pler rubber cover until it contacts
the meter assembly.
CABLE ROUTING
79
SPEC