Troubleshooting - Philips HTS4600 User Manual

9 Troubleshooting

Main unit
The buttons on this unit do
not work.
Picture
No picture.
No picture on HDMI
connection.
EN
44
Downloaded From TheatreSystem-Manual.com Manuals
Warning!
•
Risk of electric shock. Never remove the casing of
this unit.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this unit, check the following
points before requesting service. If the problem remains unsolved,
register your product and get support at www.philips.com/welcome.
• Disconnect this unit from the power outlet for a few minutes,
then connect again.
• Ensure that the interconnect cable from the subwoofer is
connected to the DVD Home Theatre unit.
• See TVs manual for correct video input channel selection.
Change the TV channel until you see the DVD screen.
• Press DISC.
• If this happens when you turn on the progressive scan setting or
change the TV type setting, you have to switch to its default
mode:
1.
Press Z to open the disc compartment.
2.
Press b.
3. Press AUDIO SYNC (for progressive scan) or SUBTITLE
(for TV Type).
• Check if the HDMI cable is faulty. Replace a new HDMI cable.
• If this happens when you change the HDMI video resolution,
you have to switch to its default mode:
1. Press Z to open the disc compartment.
2. Press b.
3. Press ZOOM.