Table of Contents
Advertisement
11 Troubleshooting
Warning
•
Risk of electric shock. Never remove the
casing of the Home Theater System.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using the
Home Theater System, check the following
points before requesting service. If the problem
remains unsolved, register your Home Theater
System and get support at www.philips.com/
welcome.
If you contact Philips, you will be asked for the
model and serial number of your Home Theater
System. The model number and serial number
are on the back or underside of your Home
Theater System. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Main unit
The buttons on this Home Theater System do
not work.
•
Disconnect this Home Theater System
from the power outlet for a few minutes,
then connect again.
Picture
No picture.
•
See TV manual for correct video input
channel selection. Change the TV channel
until you see the DVD screen.
•
Press
DISC .
•
If you have changed the
setting, switch back to default mode:
1) Press to open the disc compartment.
2) Press .
3) Press SUBTITLE .
•
If you have changed the
setting, switch back to default mode:
1) Press to open the disc compartment.
2) Press .
3) Press AUDIO SYNC .
No picture on HDMI connection.
•
Check if the HDMI cable is faulty. Replace
a new HDMI cable.
•
If this happens when you change the
HDMI video resolution, you have to
switch to its default mode:
1) Press .
2) Press .
3) Press ZOOM .
[TV Display]
[Progressive]
EN
47
Advertisement
Table of Contents
