3 Connect
This section describes the basic connections
required for this DVD Home Theatre unit
before it can be used.
Basic connections:
•
Place the unit
•
Connect video cables
•
Connect speakers to subwoofer
•
Connect subwoofer and radio antenna
Optional connections:
•
Connect audio cables/other devices
•
Connect audio from TV
•
Connect audio from cable box/
recorder/game console
•
Connect portable media player
•
Connect USB device
•
Attach table stand to DVD Home Theatre
unit
•
Mount the DVD Home Theatre unit/
speakers
Note
•
Refer to the type plate at the rear or bottom of the
product for identifi cation and supply ratings.
•
Before you make or change any connections, ensure
that all the devices are disconnected from the power
outlet.
Downloaded From TheatreSystem-Manual.com Manuals
Place the unit
•
For optimum performance, place this unit
on top of a table or mount it on the wall.
•
Never place this unit in an enclosed cabinet.
•
Install this unit near the AC outlet where
the AC power plug can be easily reached.
1
Place this DVD Home Theatre unit near to
the TV.
•
Attach the table stand to the DVD
Home Theatre unit before place it on a
table top.
2
Place the speakers at the normal listening
ear-level and directly parallel to the
listening area.
3
Place the subwoofer at the corner of the
room or at least one metre away from the
TV.
Note
•
To avoid magnetic interference or unwanted noise,
never place the speakers too close to the TV or any
radiation devices.
EN
11