Video Setup - Philips HTS4600 User Manual

[ HDMI Audio ]
When you connect this unit and TV with
HDMI cable, select the audio output
setting for this connection.
• [ All ] – the sound is output through
both your TV and this speaker system.
If the audio format on the disc is not
supported, it will be downmixed to
two-channel sound (linear-PCM).
• [ Off ] – disable audio output from
your TV. The sound is only output
through this speaker system.
[ CD Upsampling ]
Convert the music CD to a higher
sampling rate using sophisticated digital
signal processing for better sound quality.
• [ Off ] – turn off CD-upsampling.
• [ 88.2 kHz (X2) ] – convert the
sampling rate of the CDs twice as high
as the original rate.
Note
•
When you press SURROUND to switch to multi-
channel mode, it automatically turns off the CD-
upsampling feature.
[ Audio Sync ]
Set the default delay time for audio output
when you play a video disc.
1. To start, press OK.
2.
Select a speaker delay in the menu,
then press b B to set the delay time.
3. Press OK to confi rm and exit.
EN
36
Downloaded From TheatreSystem-Manual.com Manuals

Video setup

1
Press OPTIONS.
[ General Setup ] menu is displayed.
2
Press V to select
press B.
3
Select an option, then press OK.
Video Setup
TV Type
TV Display
Progressive
Picture Setting
HDMI Setup
Closed Caption
• See the explanations of the above
options in the following pages.
4
Select a setting, then press OK.
• To return to the previous menu, press
BACK.
To exit the menu, press OPTIONS.
•
[ Video Setup ], then