Connect And Set Up; Connect Speakers - Philips HTB7530D User Manual

f ANTENNA FM 75
Signal input from an antenna, cable or satellite.
Rear right
a LAN
Connect to the LAN input on a broadband
modem or router.
b SD CARD FOR VOD/BD-LIVE ONLY (Not
available in China)
Slot for SD card. The SD card is used to rent
online videos and access BD-Live.
c VIDEO-VIDEO OUT
Connect to the composite video input on
the TV.
d HDMI IN1 / HDMI IN2
Connect to the HDMI output on a digital
device.
e HDMI OUT (ARC)TO TV
Connect to the HDMI input on the TV.
EN
8
4

Connect and set up

This section helps you connect your home theater
to a TV and other devices, and then set it up.
For information about the basic connections of
your home theater and accessories, see the quick
start guide. For a comprehensive interactive guide,
visit www.connectivityguide.philips.com.
Note
•
For identification and supply ratings, see the type
plate at the back or bottom of the product.
•
Before you make or change any connections,
make sure that all devices are disconnected from
the power outlet.

Connect speakers

The speaker cables are color-coded for easy
connection. To connect a speaker to your home
theater, match the color on the speaker cable to
the color on the connector.
Speaker position plays a critical role in setting up
a surround sound effect. For best effect, position
all the speakers towards the seating position and
place them close to your ear level (seated).