Recording Movies With The Rc-3 Remote Control (Sold Separately) - Minolta DiMAGE S404 Instruction Manual

Konica minolta instruction manual digital camera dimage s404
Hide thumbs Also See for DiMAGE S404:
Table of Contents

Advertisement

RECORDING MOVIES WITH THE RC-3 REMOTE CONTROL
The RC-3 remote control (sold separately) can be used to record
movie clips up to 5m (16ft) away. Simply point the remote control
toward the camera and use the release or delay button to start and
stop the recording.
When using the release button (1), the self-time lamp will blink once
before the camera starts to record; when using the delay button (2),
the self-timer lamp will blink for two seconds before recording. The
lamp will glow to indicate the camera is recording. Both buttons will
stop the camera instantly when pressed. The remote control may not
operate with backlit subjects or under fluorescent light.
2
1
Recording indicator
Countdown in seconds
Shooting digital video is simple. Set the
main dial to movie recording (1). Frame
the picture as described in the basic
recording operation section (p. 23).
Press the shutter-release button
partway down to lock the focus. Press
the shutter-release button all the way
down and release to start recording (2).
The zoom and focus are fixed during
recording. The camera will continue to
record until the recording time is used
or the shutter-release button is pressed
again. When recording, the data panel
and monitor frame counters will count
down the remaining time.
1
2
65

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents