Locations And Names Of Controls On Or In The Unit; Blue Tooth Handfree System - Boss Audio Systems BV9986BI User Manual

7

1.6 Locations and Names of Controls on or in the unit

18 19 5
23
11 10 9 12 13
Front Panel
SD/MMC
The Front Face after removing front panel
1. OPEN button
2. POWER/MUTE button
3. Monitor
4. AUX IN socket
5. Disc Slot
6. USB Jack
7. SD/MMC Card Slot
8. SRC button
9. VOL knob
10. >>| button
11. |<< button
12. PLAY/PAUSE/1 button
22
3 20 1 4
A U X
15 8 2
14 16 17 24 6
7 21
13. INT/2 button
14. RPT/3 button
15. RDM/4 button
16. - 10 / 5 button
17. + 10 / 6 button
18. BAND/TEL button
19. APS/HANG UP button
20. EJECT button
21. RESET button
22. Small LCD Screen
23. IR Remote Sensor
24. REL button

5. BLUE TOOTH HANDFREE SYSTEM

1. Enter Bluetooth mode
When you use SRC button or Mode Menu to enter
Bluetooth mode, it will display Bluetooth interface as
right.
In Bluetooth interface, the icons descriptions are as
follows:
: Tap this icon can transfer audio between the
the Car Audio System and phone.
: Tap this icon to turn to call messages interface
as right.
: Tap this icon to turn to audio call mode, call the
name you have record in your phone, then it
will can out automatically.
: When connect with the BT device, the phone
music playback can control by tap this
icon as right.
The other icons are same as ones in the front panel
and Remote Control.
2 . Pairing and connection
1) Turn on the Bluetooth mode of the mobile phone;
2) Select the item of Finding the Bluetooth Device and enter it. After finishing the finding,
it will show the name of the Bluetooth Device if finding a Bluetooth Device.
Select it and enter it, then it will show a interface that ask you to input a password,
input the password 0000 and then enter it. Then it will tell you pair OK.
3) For some mobile phones, they can automatically connect with the BT device of the
car audio system after pairing is ok; for some mobile phones, they need to select the
paired BT device and press the CONNECTION button . When connection is ok, the
LCD of the car audio system will show LINK OK.
* when pairing is failed, press and hold the PAIR button on the remote control to enter
pairing mode, then the LCD will display PAIR START, then pair and connect with
mobile phone again.
3. Use the mobile phone to do connection or disconnection
In the connection status, find the paired and connected Bluetooth Device, then press
the disconnection button to do disconnection;
In the disconnection status, find the paired and disconnected Bluetooth Device, then
press the connection button to do connection.
28
Bluetooth interface
NOTE interface
MUSIC interface