Locations And Names Of The Controls - Boss Audio Systems BV7336 User Manual

7
1.6 Locations and Names of Controls
1 9 3 8
12
11
13
14
15 16 2 5 10
4
The figure of front panel
19 20
The figure of the Unit Chassis Face After removing the Front Panel
1. POWER & MUTE BUTTON
2. MENU BUTTONS
3. UP BUTTON
4. DOWN BUTTON
5. SEL & VOL BUTTON
6. LCD
7. REL BUTTON
8. IR SENSOR
6 7
17 18
21 22
9.BAND/LIST BUTTON 17. AUX IN JACK
10. APS BUTTON 18. USB JACK
11.1/PLAY/PAUSE BUTTON 19. Card slot
12. 2/INT BUTTON 20. DISC solt
21. RESET BUTTON
13.3/RPT BUTTON
14. 4/RDM BUTTON 22. EJECT BOTTON
15. 5/-10 BUTTON
16. 6/+10 BUTTON
4.24.4 VIDEO SETUP
BRIGHTNESS
It is for adjusting the brightness of the video output.
CONTRAST
It is for adjusting the contrast of the video output.
HUE
It is for adjusting the hue of the video output.
SATURATION
It is for adjusting the saturation of the video output.
SHARPNESS
It is for adjusting the sharpness of the video output.
4.24.5 SPEAKER SETUP
DOWNMIX
It is for selecting your desired sound effect when there is no center speaker
and subwoofer. There are 3 modes: LT/RT, STEREO, VSS.
LT/RT: When playing a disc with PRO LOGIC Dolby stereo effect, choose the
item, so it will output audio signal with vivid theatre effect.
STEREO: If you choose the item, when outputting audio signal with 5.1 channels,
it will output the left and right channels of signal ; when outputting audio signal
with 2 channels, it will output the common 2 channels of stereo signal.
VSS: If you choose the item, when playing a disc recorded with 5.1 channels,
the main channel speakers can output audio signal with VSS effect.
24