Remote Release Terminal; Pc Terminal - Minolta Maxxum 9 Instruction Manual

OTHER — Remote Release Terminal
Attach either the Remote Cord RC-1000S or RC-1000L (sold separately) to reduce
blur when taking long exposures.
1. Slide the remote-control-terminal
2. Insert the plug into the terminal.
80
cover down.
OTHER — PC Terminal
Flash units which can not be connected to the accessory shoe can be connected to
the camera via the PC terminal.
• TTL automatic flash metering does not function when the flash is connected to the PC
terminal.
1. Set the exposure mode dial to M,
2. Plug the PC connector into the
• The flash unit may fire unexpectedly if it is on
• The PC terminal is compatible with both center
Flash units with a low trigger voltage may not work on this
camera. Contact a Minolta Service Facility if your flash has a
low trigger voltage.
then set the shutter speed to 1/250
or slower.
camera's PC socket.
when the sync. cord is plugged into the PC
terminal.
positive (normal polarity) and center negative
(positive polarity) flash units.
81