Minolta Maxxum 9 Instruction Manual page 50

CUSTOM FUNCTIONS
Cust 8 — Frame Counter
1 – Frame counter in data panel counts up.
2 – Frame counter in data panel counts down.
• The frame counter counts up when non-DX coded film is loaded.
Cust 9 — AF Button
1 – Selectable focus area
Press the AF button and turn the control dial to
specify the desired local focus area. See page 31 for
details.
2 – Spot Focus
Press the AF button to focus using the center focus
sensor (p. 31).
Cust 10 — AE-Lock Button
• AEL appears in the viewfinder when AE-lock button is active (down).
• Slow sync is selected when the built-in flash is up or an attached accessory flash is on.
• Manual shift is selected when the exposure mode is set to manual.
1 – Press to activate, release to cancel.
2 – Press once to activate, press again to
cancel.
• Turning the built-in flash on or off cancels AE lock.
96
Cust 11 — Bracketing Sequence
1 – Metered exposure, Underexposure(s), Over-exposure(s)
• A 5 frame bracket in 1/2EV increments is exposed in the following order...
Normal -0.5EV +0.5EV
2 – Underexposure(S), Metered exposure, Over-exposure(s)
• A 5 frame bracket in 1/2EV increments is exposed in the following order...
-1.0EV -0.5EV Normal
Cust 12 — Rewind Speed
1 – Fast Rewind
Rewinds a 36 exposure roll in approximately 6 seconds.
2 - Slow (silent) Rewind
Rewinds a 36 exposure roll in approximately 9 seconds.
-1.0EV +1.0EV
+0.5EV +1.0EV
97