Removing/Assembling The Freezer Drawer Handle; Removing/Assembling The Doors And Drawers - LG GF24BG series Owner's Manual

13 INSTALLATION
Removing/Assembling the
Freezer Drawer Handle
Removing the Handle
1
Loosen the set screws
lower side of the handle with a
wrench and remove the handle.
2
Loosen the mounting fasteners
connect to the
freezer drawer
and handle
1
using a / in.
4
Allen wrench,
and remove
the mounting
fasteners.
Assembling the Handle
1
Assemble the mounting fasteners
both ends of the handle using a
wrench.
2
Place the handle on the door by tting the
handle
footprints over
the mounting
fasteners and
tightening the
set screws
1
with a / in.
8
Allen wrench.
WARNING
When assembling or disassembling the
handle:
 Grasp the handle tightly to avoid drop-
ping it.
 Do not swing the handle into nearby
people or animals.
 Make sure that the bracket hole of the
handle ts properly into the stopper
bolt of the door. Assemble the set
screws to x the handle into place.
 Make sure that there is not a gap
between the door and handle after
assembling the handle.
Removing/Assembling the
Doors and Drawers
When it is necessary to move the refrigerator
through a narrow opening, removing the doors
located on the is the recommended procedure.
1
/ in. Allen
8
 If your entrance door is too narrow
that
 Use two or more people to remove and
 Disconnect the electrical supply to the
 Do not put hands, feet or other objects
at
1
/ in. Allen
4
 Be careful when handling the hinge and
 Remove food and bins before detaching
WARNING
for the refrigerator to pass through,
remove the refrigerator doors and move
the refrigerator sid eways through the
doorway.
install the refrigerator doors. Failure to
do so can result in back or other injury.
refrigerator before installation. Failure
to do so could result in serious injury or
death.
into the air vents or bottom of the
refrigerator. You may be injured or
receive an electrical shock.
stopper. You may be injured.
the doors and drawers.