Continuous-Drive Mode; Remote Control (Optional) - Minolta Vectis 30 Instruction Manual

Minolta camera instruction manual model vectis30
Hide thumbs Also See for Vectis 30:
Table of Contents

Advertisement

CONTINUOUS DRIVE MODE
In this mode, the camera will release the shutter and advance the film as long as the
shutter-release button is held down.
1. Press the self-timer / remote-control button until
2. Press the shutter-release button all-the-way down
and hold.
• The camera will release the shutter and advance the film
as long as the shutter-release button is held down.
• When taking flash pictures, the shutter will release after the
flash has charged.
• To cancel the continuous drive mode, press the self-
timer/remote-control button until
data panel, or turn the camera off.
66
appears in the data panel.
disappears from the
REMOTE CONTROL MODE (OPTIONAL)
The IR Remote Control RC-3 (not included) allows remote camera operation up to 6m
(19.7 ft.) away.
• The remote control may not operate with backlit subjects or under fluorescent light.
• To save power, the camera automatically shuts down if the remote control is not operated for
more than eight minutes.
1. Place the camera on a tripod and press the self-
timer / remote-control button until
the data panel.
appears in
(Continued on the following page)
67

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents