Continuous-Drive Mode; Remote Control - Minolta VECTIS 40 Manual

CONTINUOUS DRIVE MODE
In this mode, the camera continuously takes pictures and advances the film as long as
the shutter-release button is held down.
1. Press the self-timer/remote-control button until
PRINT
appears in the data panel.
SEL TITLE
ADJ DATE
2. When you're ready to take pictures, press the
shutter-release button all-the-way down and hold.
• The shutter will continue to release and advance the film as long
as the shutter-release button is held down. When taking flash
pictures, the shutter will release after the flash has charged.
• To cancel the continuous drive mode, press the self-timer/drive-
mode button until the indicator disappears from the data panel, or
turn the camera off.
REMOTE CONTROL MODE
The IR Remote Control RC-3 allows remote camera operation from up to 6m (19.7 ft.)
away.
• The remote control will not operate with backlit subjects or under fluorescent light.
• After taking the picture, the remote control is canceled for the next frame.
• To save power, the camera automatically shuts itself off if the remote control is not
operated for more than eight minutes.
1. Place the camera on a tripod and press the self-
PRINT
timer/remote-control button until
SEL TITLE
data panel.
ADJ DATE
appears in the
(Continued on the following page)