Thick Stock; Envelopes - Konica Minolta PagePro 1380 MF User Manual

Thick stock

Paper thicker than 90 g/m
thick stock to ensure acceptable performance and to ensure that the image
does not shift.
Capacity
Orientation Face up
Driver
Media Type
Weight
DO NOT use thick stock that is
Mixed with any other media in the trays (as this will cause misfeeds)

Envelopes

Print on the front (address) side only. Some parts of the envelope consist of
three layers of paper—the front, back, and flap. Anything printed in these lay-
ered regions may be lost or faded.
Capacity
Orientation Face up
Driver
Media Type
Weight
Use envelopes that are
Common office envelopes with diagonal joints, sharp folds and edges,
and ordinary gummed flaps
Because the envelopes pass through heated rollers, the gummed
area on the flaps may seal. Using envelopes with emulsion-based
glue avoids this problem.
Approved for laser printing
Dry
28
2
(24 lb bond) is referred to as thick stock. Test all
Media Tray Up to 10 thick stock sheets, depending on
their thickness
Manual Feed 1 sheet only
Tray
Thick Paper
91 to 163 g/m² (25 to 43 lb bond)
Media Tray Up to 10 envelopes, depending on their
thickness
Manual Feed 1 sheet only
Tray
Envelope
91 to 163 g/m² (25 to 43 lb bond)
Media types