Saving scan settings as a Job
Frequently used scan settings can be saved.
With the settings to be saved in the scan setting window, click
the save Job button. The Job-registry dialog box will open.
Select the category in which to save the settings from
the drop-down menu.
Enter the Job name. Click OK to save the settings. See
page 42 to load a Job.
Deleting a Job
A Job file can be deleted. Once deleted, it can not be recovered.
Click the load Job button.
Select the Job file to be deleted from the Job categories
in the selection window. Use the following key(s) to
delete the selected file:
Windows – delete key
Macintosh – command key + D.
57