Tools - Hoover MAX Extract Owner's Manual

after CleaninG
Allow carpet or upholstery to dry. To help prevent
matting and resoiling the carpet, keep children and
pets away from surface until it is completely dry. If it
is necessary to walk on damp carpet, place towels
or white cloths on the traffic areas.
If furniture must be replaced before the carpet is dry,
place plastic or aluminum foil under legs of furniture
so metal slides or wood finishes will not stain the
carpet.
Empty tanks, rinse with clean water and let air dry.
Rinse the Dirty Water Tank lid and let air dry.

4. tOOls

tOOls
4.1
A
b
spinsCrub Hand tOOl
®
(Available on select models only)
4.2 To remove the SpinScrub hand tool pull tool
®
up and outward.
To reposition the tool, reverse this procedure.
HOw tO attaCH tOOls
CAUTION
!
To reduce the risk of injury from moving parts - Unplug cleaner before
connecting SpinScrub Hand Tool. Not to be used for grooming a pet.
®
Place handle in upright position and remove hose from rack.
Turn off and unplug cleaner from electrical outlet.
All tools attach to the hose in the same manner:
4.3 Connect tool to hose by sliding it onto connector until the tab (G) locks it
securely.
Using your thumb, push forward and up on the latch (H) to remove tool.
Actual model may vary from images shown.
3.5
Filter
Screens
A
IMPORTANT
3.5 To keep performance of your machine at
peak level remove nozzle (Fig. 5.1) and check
filter screens (A) located inside the base of the
unit and remove lint or debris.
A. SpinScrub Hand Tool (Available on select
®
models only) has rotating brush for extra scrubbing
action on small carpet areas, carpeted stairs and
upholstery. For some models, the brushes can
be removed for converting to the scrub module.
(Available on select models only)
B. Stair/Upholstery Nozzle has a built-in brush to
help provide the scrubbing action some spots may
need for removal.
4.2
4.3
!
12
G
H