Capresso CoffeeTEAM Pro Glass 477 Operating Instructions Manual page 10

7.4 REMOVING / ATTACHING THE BEAN CONTAINER
• Grasp the bean container with two hands and turn the bean container clockwise.
• The machine will beep, indicating that the bean container is no longer locked.
• Once the bean container is unlocked, lift straight up off of the machine. The door
on the bottom of the bean container will keep any beans from falling out of the
bottom of the bean container.
• To remove and replace the upper burr see chapter 7.5 below.
• Place the bean container back onto the machine at a slight angle and match the
"Align" icon on the left of the machine to the "Align" icon on the left of the bean
container (Fig.7) and turn the bean container counterclockwise to lock back into
position.
NOTE: If the bean container is not locked back into place when the BREW button
is pressed, the machine will beep indicating there is an error, correctly align and
lock the bean container. If the bean container lid is not in place when the BREW
button is pressed, the machine will beep indicating there is an error. Push down
on the lid to fully engage.
7.5 REMOVING / REPLACING THE UPPER BURR
• Follow steps above in chapter 7.4 to remove the bean container.
• Turn the fineness knob clockwise towards RELEASE to unlock the upper burr.
• Pull the upper burr straight out using the small metal handle attached to the
upper burr (Fig. 8).
IMPORTANT: Never try to remove the lower burr!
NOTE: Clean the upper burr regularly as described in chapter 10.6
• To reassemble, place the upper burr back into the machine and ensure it is
correctly placed as seen in Fig. 8 & Fig. 9. If the upper burr does not fit correctly,
adjust it until the upper burr sits flush in the machine.
IMPORTANT: Push metal upper burr handle to the left or right side prior to
attaching the bean container.
• Turn the fineness knob counterclockwise to Coarse, Medium or Fine to lock
the upper burr in place. The machine will beep to indicate the upper burr is locked.
IMPORTANT: Never run the machine with the upper burr unlocked (fineness knob
in RELEASE position). Always double check the upper burr is locked back in
place when reattaching the bean container.
• Attached the bean container as described in chapter 7.4
7.6 GRINDER SETTINGS / FILLING THE BEANS
• Select the fineness setting (Fig. 4) by turning the knob until the indicator matches
up with one of the fineness levels in front of the bean container from fine to coarse.
• For first time use, use the coarsest setting.
• For dark oily beans use a coarse setting and push the OILY button until the oily
bean icon illuminates to select the oily bean function. For light, dry beans use the
finer settings.
• Open the bean container lid (Fig. 1.8) and fill the bean container (Fig. 1.7) with
whole coffee beans. Make sure that the water container lid is closed to prevent
beans from spilling into the water container.
CAUTION: Check beans for foreign objects (chapter 3e).
• The bean container will hold approximately 8-oz of beans.
IMPORTANT: Never fill the bean container with frozen or coated beans
(chapters 3a and 3d).
10