Product Description; About The Product; Chapter 2. Installation And Setup; Unpacking Your Touch Monitor - AKG KOT-0190US-SA4B User Manual

19" lcd open frame saw touch monitor
Table of Contents

Advertisement

AKG Technology, Inc. (http://www.akgtech.com)
Tele:(909)967-5572; Fax: (909) 580-8228; Email: engineer@akgtech.com
Mailing Address: 1225 Benito Avenue, #M, Alhambra, CA 91803, U. S. A.

1.1 Product Description

KOT-0190US-SA4B means KeeTouch's Open frame Touch monitor, size is 19", with both
USB and Serial (RS232) interface, integrates with Surface Acoustic wave touch screen and
Dual USB/RS232 controller, 4 mm thickness glass of SAW touch screen panel; this
KOT-0190US-SA4B has a long-lasting product cycle because the enclosure is controlled by
KeeTouch's specifications. Future panel improvements are therefore possible without external
changes.

1.2 About the Product

Your LCD open frame touch monitor is a 19" SXGA TFT color display with the
following features:
Long lasting product cycle-enclosure controlled by KeeTouch specifications
Future generation panels phased-in without external changes
High quality panel with high brightness, high contrast ratio and broad viewing angle
Multiple mounting options including VESA mount, horizontal or vertical
bracket-mount
KeeTouch's SAW technology on pure glass for the ultimate in image quality
Finger or gloved hand operation
Dual USB/Serial touch interface port
Worldwide agency approvals
For full Product Specifications refer to Appendix C.
. INSTALLATION & SETUP
Chapter
2
2
.
This chapter discusses how to install your LCD touch monitor and how to install the driver
software.

2.1 Unpacking Your Touch monitor

Check that the following 9 items are present and in good condition:
One Touch monitor
2 - 11
2 L-brackets
4 x M4 Screws and Washers
LCD Open frame SAW Touch Monitor

Advertisement

Table of Contents
loading

Table of Contents