Fm/Am Radio - Panasonic SC-PM45 Operating Instructions Manual

FM/AM Radio

Manual tuning Manual tuning
1 Press [FM/AM] to select "FM" or "AM".
2 Press [PLAY MODE] to select "MANUAL".
Press [ /4] or [ /¢] to select the frequency of
3
the required station.
" ST " is displayed when a stereo FM broadcast is being
received.
To tune automatically
Press [ /4] or [ /¢] for a moment until the frequency
starts changing rapidly. The unit begins auto tuning, stopping
when it fi nds a station.
• Auto tuning may not function when there is excessive
interference.
• To cancel auto tuning, press [ /4] or [ /¢] once
again.
To improve FM sound quality To improve FM sound quality
Press and hold [PLAY MODE] to display "MONO".
To cancel
Press and hold [PLAY MODE] again until "MONO"
disappears.
• MONO is also cancelled if the frequency is changed.
• Turn off "MONO" for normal listening.
Memory preset Memory preset
Up to 20 stations can be set in the FM band and 15 stations
in the AM band.
Preparation
Press [FM/AM] to select "FM" or "AM".
Automatic presetting Automatic presetting
Press and hold [PROGRAM] to start presetting.
Manual presetting Manual presetting
Press [PLAY MODE] to select "MANUAL".
1
2 Press [ /4] or [ /¢] to tune to the required
station.
Press [PROGRAM].
3
Press numeric buttons to select a channel.
4
The station occupying a channel is erased if another
station is preset in that channel.
Repeat steps 2 to 4 to preset more stations.
5
Selecting a preset station Selecting a preset station
Press numeric buttons to select the channel.
For two-digit channel, press [h10], then the two digits.
OR
1 Press [PLAY MODE] to select "PRESET".
2 Press [ /4] or [ /¢] to select the channel.
FM allocation setting FM allocation setting
By main unit only
This system can also receive FM broadcasts allocated in
0.1 MHz steps.
To change the step to 0.1 MHz
Press and hold [FM].
1
After a few seconds the display changes to a fl ashing
display of the current minimum frequency.
2 Continue to hold down [FM].
• When the minimum frequency changes, release the
button. To return to the original step, repeat the above
steps.
• After the setting is changed, any previously preset
frequency will be cleared.
9