Using The Fm/Am Radio - Panasonic SC-AKX50 Operating Instructions Manual

Using the FM/AM radio

Manual tuning
1
Press [FM/AM] to select "FM" or "AM".
2
Press [PLAY MODE] to select "MANUAL".
3
Press [2/3] or [5/6] to select the frequency of the
required station.
" " is displayed when a stereo FM broadcast is being
received.
To tune automatically
Press and hold [2/3] or [5/6] until the frequency starts
changing rapidly. The unit begins auto tuning, stopping when it
fi nds a station.
• Auto tuning may be interrupted when there is excessive
interference.
• To cancel auto tuning, press [2/3] or [5/6] once again.
To improve the sound quality
When "FM" is selected
Press and hold [PLAY MODE] to display "MONO".
To cancel
Press and hold [PLAY MODE] again until "MONO" disappears.
• MONO is also cancelled if the frequency is changed.
• Turn off "MONO" for normal listening.
When "AM" is selected
Press and hold [PLAY MODE].
Each time you press the button: BP2
AM allocation setting
By main unit only
This system can also receive AM broadcasts allocated in 10 kHz
steps.
To change the step from 9 kHz to 10 kHz
1
Press and hold [FM/AM].
After a few seconds the display changes to a fl ashing display of
the current minimum frequency.
2
Continue to hold down [FM/AM].
• When the minimum frequency changes, release the button. To
return to the original step, repeat the above steps.
• After changing the setting, previously preset frequency will be
cleared.
10
RQT804
AKX50_GN_EN.indd 10 AKX50_GN_EN.indd 10
Memory preset
30 FM and 15 AM stations can be preset.
Preparation
Press [FM/AM] to select "FM" or "AM".
Automatic presetting
1
2
The tuner presets all the stations it can receive into the channels
in ascending order. When fi nished, the fi rst station memorised is
tuned in.
Manual presetting
1
2
BP1 3
4
5
Selecting a preset station
Press the numeric buttons to select a channel.
For channels 10 to 30 press [ 10], then the two digits.
OR
1
2
Press [OK] repeatedly to select either "CURRENT" or
"LOWEST".
CURRENT Tuning begins from the current frequency.
LOWEST Tuning begins from the lowest frequency.
Press and hold [PROGRAM] to start presetting.
Press [PLAY MODE] to select "MANUAL".
Press [2/3] or [5/6] to tune to the required station.
Press [PROGRAM].
Press the numeric buttons to select a channel.
The station occupying a channel is erased if another station is
preset to that channel.
Repeat steps 2 to 4 to preset more stations.
Press [PLAY MODE] to select "PRESET".
Press [2/3] or [5/6] to select the channel.
2/25/2010 10:21:36 AM 2/25/2010 10:21:36 AM