Chevrolet Kodiak 2008 Owner's Manual page 141

Temperature Knob: Turn the middle knob located
clockwise or counterclockwise to increase or decrease
the temperature inside of your vehicle. Turn the
knob toward the red area for warmer air. Turn the knob
toward the blue area for cooler air.
Turn the mode knob on the far right clockwise or
counterclockwise to direct the airflow inside of your
vehicle.
To change the current mode, select one of the following:
9
(Off): This setting turns the system off.
H
(Vent): This mode directs air to the instrument
panel vents.
)
(Bi-Level): This mode directs half of the air to the
instrument panel vents, then directs the remaining
air to the floor vents. Cooler air is directed to the upper
vents and warmer air to the floor vents.
6
(Floor): This mode directs most of the air to the floor
vents. Use this mode to send air to the rear of the vehicle.
Keep the area under the front seats free of objects that
could obstruct airflow to the rear of the vehicle.
The mode knob can also be used to select the defrost
mode. For more information, see "Defogging and
Defrosting" later in this section.
If your vehicle has air conditioning, the controls will look
like this:
Vehicles With Air Conditioning
On hot days, open the windows to let hot inside air
escape; then close them. This helps to reduce the time
it takes for the vehicle to cool down. It also helps the
system to operate more efficiently.
<
(Maximum Air Conditioning): Turn the right knob
to this setting for maximum cooling. This setting
puts the system in recirculation mode and helps to
maximize your air conditioner's performance and your
vehicle's fuel economy. This setting also cools the
air the fastest.
Y
(Air Conditioning): This setting is used for normal
cooling on hot days. It cools outside air and directs
it through the instrument panel vents.
3-21