Zanussi ZWH 7160 P User Manual page 16

Programme selector di-
1
al
Specials Jeans Cottons
Mini 30
Blanket
Easy Iron
Spin
Drain
Rinse Wool
Handwash
2 Temperature button
Spin reduction
3
4 Rinse Hold
16
Turn the programme selector dial to the required pro-
gramme. The selector dial can be turned either clock-
wise or counter-clockwise. The green pilot light of the but-
ton 9 starts flashing: the appliance is now switched on.
Cottons
If you turn the programme selector dial to another pro-
+Prewash
Cottons Eco
gramme when the appliance is working, the red pilot light
Synthetics
of the button 9 will flash 3 times and the message Err is dis-
Mixed Fabric
Delicates
played to indicate a wrong selection. The appliance will not
perform the new selected programme.
• To switch the appliance off, turn the programme selector
dial to the position
• To cancel or change a running programme, switch the ap-
pliance off by turning the programme selector dial to the po-
sition
tor to the desired programme. Start the new programme by
pressing the button 9 again. The water in the tub will be not
emptied out.
Push the temperature button to select the most suita-
ble temperature for washing your laundry .
Cold: Cold wash.
By selecting a programme, the appliance proposes automati-
cally the maximum spin speed provided for that programme.
Press this button repeatedly to change the spin speed, if you
want your laundry to be spun at a different speed. The relevant
light illuminates.
By pressing this button the corresponding pilot light illumi-
nates.
By selecting this function the water of the last rinse is not
emptied out to prevent the fabrics from creasing. Before open-
ing the door it will be necessary to empty out the water.
To empty out the water, please read the paragraph «At
the end of the programme».
.
. Select the new programme by turning the selec-
www.zanussi.com